BVLYD - KX-69C BLACK TONER FOR KY-P4430
- MSDS: BVLYD
- Manufacturer: TOMOEGAWA PAPER CO LTD
- Product Name: KX-69C BLACK TONER FOR KY-P4430
- National Stock Number: 6850-00N052292
Product Identification
Product ID:KX-69C BLACK TONER FOR KY-P4430
MSDS Date:10/09/1991
FSC:6850
NIIN:00N052292
MSDS Number: BVLYD
Responsible Party
TOKYO, JAPAN
US
Emergency Phone: 092-431-2111
Info Phone: 092-431-2111
Cage: 55643
Contractor
Telephone: 092-431-2111
Cage: 55643
Ingredients
ACRYLIC ACID BUTYL ESTER POLYMER W/STYRENE; (STYRENE
CAS: 25767-47-9
Fraction By Weight: 64%
OSHA PEL N/K
ACGIH TLV: N/K
IRON OXIDE; (MAGNETITE)
CAS: 1317-61-9
Fraction By Weight: 35%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3 (FE)
25035-53-4
CAS: 9003-07-4
RTECS: UD1842000
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MINIMAL IRRITATION TO RESPIRATORY
TRACT MAY OCCUR AS WITH EXPOSURE TO ANY NON-TOXIC DUST.
ACCUMULATION OF DUST IN RESPIRATORY SYSTEM.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MINUTES.
INHALATION: REMOVE TO FRESH AIR. IF EFFECTS OCCUR, CONSULT LOCAL
MEDICAL PERSONNEL. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER .
INGEST ION: CALL MD IMMEDIATELY .
Fire Fighting
Extinguishing Media:WATER FOG, FOAM, CARBON DIOXIDE OR DRY CHEMICALS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT FIRE HAZARD BUT CAN BURN IN FIRE.
Accidental Release
Spill Release Procedures:SWEEP UP OR CLEAN UP WITH VACUUM CLEANER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE.
Other Precautions:NONE.
Exposure Controls
Respiratory Protection:NONE REQUIRED UNDER NORMAL USE. WEAR NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GENERAL VENTILATION SUFFICIENT TO KEEP AIRBORNE
CONCENTRATION BELOW CURRENT EXPOSURE LIMITS .
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGG .
Other Protective Equipment:NONE REQUIRED UNDER NORMAL USE.
Work Hygienic Practices:INHALATION SHOULD BE AVOIDED.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:1.60 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER, ODORLESS.
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, AND
OXIDES OF NITROGEN.
Disposal
Waste Disposal Methods:INCINERATE OR DUMP UNDER CONDITIONS WHICH MEET
ALL FEDERAL, STATE AND LOCAL ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.